# New filesystem project

**URL:** <https://discourse.ioquake.org/t/new-filesystem-project/805>\
**Category:** dev\
**Created:** [January 24, 2017, 5:01am UTC](https://discourse.ioquake.org/t/new-filesystem-project/805 "2017-01-24T05:01:49Z")\
**Posts on this page:** 4\
**Page:** 3

<div class="post-metadata">

**Author:** ![Chomenor](https://avatars.discourse-cdn.com/v4/letter/c/6de8d8/32.png) [@Chomenor](https://discourse.ioquake.org/u/Chomenor)\
**Post date:** [August 7, 2018, 2:32pm UTC](https://discourse.ioquake.org/t/new-filesystem-project/805/41 "2018-08-07T14:32:26Z")

</div>

I do have test builds for Windows: [https://github.com/Chomenor/ioq3\_new\_filesystem/releases](https://github.com/Chomenor/ioq3_new_filesystem/releases)

It isn’t currently 100% up to date with the most recent updates, but it should be fine for the most part.

---

<div class="post-metadata">

**Author:** ![Frenchguy](https://avatars.discourse-cdn.com/v4/letter/f/13edae/32.png) [@Frenchguy](https://discourse.ioquake.org/u/Frenchguy)\
**Post date:** [August 7, 2018, 3:18pm UTC](https://discourse.ioquake.org/t/new-filesystem-project/805/42 "2018-08-07T15:18:57Z")

</div>

OK, sorry, I din’t found them myself ☹

---

<div class="post-metadata">

**Author:** ![Frenchguy](https://avatars.discourse-cdn.com/v4/letter/f/13edae/32.png) [@Frenchguy](https://discourse.ioquake.org/u/Frenchguy)\
**Post date:** [August 8, 2018, 1:17pm UTC](https://discourse.ioquake.org/t/new-filesystem-project/805/43 "2018-08-08T13:17:42Z")

</div>

I tried yesterday.  
On a blank Quake 3 1.32 with classic official ioquake 3, then copying your files over this…

couldn’t find a difference…  
:-/

I dropped a bi-hundred of quake bot/models, and the menu only displayed until “M” modelnames…  
I did the same with levels/maps, and only a 1/4 displayed in menus…

:-/

Is there a way to check If the mod is well loaded?  
I try toi hit [²] to call console as usually, and never pops…  
same problem on basic ioqueka3 installation, that menu has been changed to another [touch] ??  
can’t find how to get It in readme or wikis either…  
☹

---

<div class="post-metadata">

**Author:** ![Chomenor](https://avatars.discourse-cdn.com/v4/letter/c/6de8d8/32.png) [@Chomenor](https://discourse.ioquake.org/u/Chomenor)\
**Post date:** [August 8, 2018, 1:58pm UTC](https://discourse.ioquake.org/t/new-filesystem-project/805/44 "2018-08-08T13:58:17Z")

</div>

This project doesn’t currently change the map and model limits in the UI, as that is dependent on the mod you are running. You will need to load maps and models explicitly by using the /map and /model commands if you have a lot installed.

There are sometimes issues with the console key in ioquake3. Try using Shift + ESC to open the console instead.

[Previous page](https://discourse.ioquake.org/t/new-filesystem-project/805.md?page=2)